图像仅供参考
请参阅产品规格
-
商品编号:
74ALVCH16827DGG,11
-
简述:
20-bit buffer/line driver, non-inverting; 3-state
-
描述:
The 74ALVCH16827 is a 20-bit non-inverting buffer/driver with 3-State outputs for bus oriented applications.
The 74ALVCH16827 consists of two 10-bit sections with separate output enable signals. For either 10-bit buffer section, the two output enable (1OE1 and 1OE2 or 2OE1 and 2OE2) inputs must both be active. If either output enable input is high, the outputs of that 10-bit buffer section are in high impedance state.
The 74ALVCH16827 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.
- 数据手册:
特性
Wide supply voltage range of 1.2V to 3.6V
Complies with JEDEC standard no. 8-1A
Wide supply voltage range of 1.2V to 3.6V
CMOS low power consumption
Direct interface with TTL levels
Universal bus transceiver with D-type latches and D-type flip-flops capable of operating in transparent, latched, clocked or clocked-enabled mode.
MULTIBYTE™ flow-through standard pin-out architecture
Low inductance multiple VCC and GND pins for minimum noise and ground bounce
Current drive ±24 mA at 3.0 V
All inputs have bus hold circuitry
Output drive capability 50 Ω transmission lines @ 85°C
3-State non-inverting outputs for bus oriented applications
