在线客服
我的收藏
|免费注册
English
Default welcome nexperia!
产品搜索
    购物车
    共 17件相关商品
    产品
    描述
    价格
    库存
    数据手册
    操作

    限量供应

    新品

    NCA9555
    NCA9555BYHP
    Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 2.5 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state with weak pull-up resistor

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Specified from -40 °C to +85 °C

    1+:¥5.6122

    500+:¥5.1020

    1000+:¥4.8591

    3000+:¥2.0280

    3,000
    数据手册

    限量供应

    PCA9555
    PCA9555PWJ
    Low-voltage 16-bit I²C-bus I/O port with interrupt and weak pull-up

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 2.3 V to 5.5 V

    • Ultra low standby current consumption:

      • 1 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state with weak pull-up resistor

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • TSSOP24 package: plastic thin shrink small outline package; 24 leads; body width 4.4 mm

    • Specified from -40 °C to +85 °C

    1+:¥5.6122

    500+:¥5.1020

    1000+:¥4.8591

    2500+:¥2.0280

    3000+:¥4.6277

    2,500
    数据手册

    限量供应

    PCA9539
    PCA9539PWJ
    Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output, reset pin and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 2.3 V to 5.5 V

    • Ultra low standby current consumption:

      • 1 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • Reset input (RESET) for resetting PCA9539 to default values

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • TSSOP24 package: plastic thin shrink small outline package; 24 leads; body width 4.4 mm

    • Specified from -40 °C to +85 °C

    1+:¥6.1734

    500+:¥5.6122

    1000+:¥5.3449

    2500+:¥2.2300

    3000+:¥5.0904

    2,500
    数据手册

    限量供应

    PCA9535
    PCA9535PWJ
    Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 2.3 V to 5.5 V

    • Ultra low standby current consumption:

      • 1 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • TSSOP24 package: plastic thin shrink small outline package; 24 leads; body width 4.4 mm

    • Specified from -40 °C to +85 °C

    1+:¥5.6122

    500+:¥5.1020

    1000+:¥4.8591

    2500+:¥2.0280

    3000+:¥4.6277

    2,500
    数据手册

    限量供应

    新品

    NCA9539
    NCA9539PWJ
    Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output, reset pin and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 2.5 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • Reset input for resetting NCA9539 to default values (RESET)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Packages offered: TSSOP24 and HWQFN24

    • Specified from -40 °C to +85 °C

    1+:¥4.1837

    500+:¥3.8034

    1000+:¥3.6223

    2500+:¥1.8250

    3000+:¥3.4498

    2,500
    数据手册

    限量供应

    新品

    NCA9555
    NCA9595PWJ
    Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output, configuration registers and programmable pull-up resistors

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 2.5 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state with weak configurable pull-up resistors

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • Configuration pull-up registers to disable pull up resistors on GPIOs

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Specified from -40 °C to +85 °C

    1+:¥6.4285

    500+:¥5.8441

    1000+:¥5.5658

    2499+:¥2.3230

    3000+:¥5.3008

    2,499
    数据手册

    限量供应

    新品

    NCA9535
    NCA9535PWJ
    Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 2.5 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Package offered: TSSOP24 and HWQFN24

    • Specified from -40 °C to +85 °C

    1+:¥4.2856

    500+:¥3.8960

    1000+:¥3.7105

    2490+:¥1.8430

    3000+:¥3.5338

    2,490
    数据手册

    限量供应

    新品

    NCA9555
    NCA9555PWJ
    Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 2.5 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state with weak pull-up resistor

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Specified from -40 °C to +85 °C

    1+:¥5.1020

    500+:¥4.6382

    1000+:¥4.4174

    2480+:¥1.8430

    3000+:¥4.2070

    2,480
    数据手册

    新品

    NCA9555
    NCA9595PW-Q100J
    Q100 - Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output, configuration registers and programmable pull-up resistors

    • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

      • Specified from -40 °C to +125 °C

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 4 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state with weak configurable pull-up resistors

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • Configuration pull-up registers to disable pull up resistors on GPIOs

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    1+:¥7.3980

    500+:¥6.7255

    1000+:¥6.4052

    3000+:¥6.1002

    0
    数据手册

    新品

    NCA9555
    NCA9555PW-Q100J
    Q100 - Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output and configuration registers

    • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

      • Specified from -40 °C to +125 °C

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 4.0 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state with weak pull-up resistor

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    1+:¥5.8674

    500+:¥5.3340

    1000+:¥5.0800

    3000+:¥4.8381

    0
    数据手册

    新品

    NCA9555
    NCA9555BY-Q100HP
    Q100 - Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output and configuration registers

    • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

      • Specified from -40 °C to +125 °C

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 4.0 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state with weak pull-up resistor

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    1+:¥6.4591

    500+:¥5.8719

    1000+:¥5.5923

    3000+:¥5.3260

    0
    数据手册

    新品

    NCA9539
    NCA9539PW-Q100J
    Q100 - Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output, reset pin and configuration registers

    • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

      • Specified from -40 °C to +125 °C

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 4 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • Reset input for resetting NCA9539-Q100 to default values (RESET)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Packages offered: TSSOP24 and HWQFN24

    1+:¥5.9183

    500+:¥5.3803

    1000+:¥5.1241

    3000+:¥4.8801

    0
    数据手册
    NCA9539
    NCA9539BYHP
    Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output, reset pin and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 2.5 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • Reset input for resetting NCA9539 to default values (RESET)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Packages offered: TSSOP24 and HWQFN24

    • Specified from -40 °C to +85 °C

    1+:¥6.1734

    500+:¥5.6122

    1000+:¥5.3449

    3000+:¥5.0904

    0
    数据手册
    NCA9539
    NCA9539BY-Q100HP
    Q100 - Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output, reset pin and configuration registers

    • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

      • Specified from -40 °C to +125 °C

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 4 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • Reset input for resetting NCA9539-Q100 to default values (RESET)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Packages offered: TSSOP24 and HWQFN24

    1+:¥7.1020

    500+:¥6.4564

    1000+:¥6.1489

    3000+:¥5.8561

    0
    数据手册

    新品

    NCA9535
    NCA9535PW-Q100J
    Q100 - Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output and configuration registers

    • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

      • Specified from -40 °C to +125 °C

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 4 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Package offered: TSSOP24 and HWQFN24

    1+:¥5.1020

    500+:¥4.6382

    1000+:¥4.4174

    3000+:¥4.2070

    0
    数据手册
    NCA9535
    NCA9535BYHP
    Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output and configuration registers

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 2.5 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Package offered: TSSOP24 and HWQFN24

    • Specified from -40 °C to +85 °C

    1+:¥5.1020

    500+:¥4.6382

    1000+:¥4.4174

    3000+:¥4.2070

    0
    数据手册
    NCA9535
    NCA9535BY-Q100HP
    Q100 - Low-voltage 16-bit I²C and SMBus low-power I/O expander with interrupt output and configuration registers

    • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

      • Specified from -40 °C to +125 °C

    • I²C-bus to parallel port expander

    • Operating power supply voltage range of 1.65 V to 5.5 V

    • Low standby current consumption:

      • 4 µA (maximum)

    • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

      • Vhys = 0.10 × VCC (typical)

      • Noise filter on SCL and SDA inputs

    • 5 V tolerant I/Os

    • 16 I/O pins which power up configured in input state

    • Open-drain active LOW interrupt output (INT)

    • 400 kHz Fast-mode I²C-bus

    • Internal power-on reset

    • No glitch on power-up

    • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

    • Latch-up performance exceeds 100 mA per JESD78, Class II

    • ESD protection:

      • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

      • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

    • Package offered: TSSOP24 and HWQFN24

    1+:¥5.9183

    500+:¥5.3803

    1000+:¥5.1241

    3000+:¥4.8801

    0
    数据手册