Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Input levels:

• For 74HC573-Q100: CMOS level

• For 74HCT573-Q100: TTL level

Inputs and outputs on opposite sides of package allowing easy interface with microprocessors

Useful as input or output port for microprocessors and microcomputers

3-state non-inverting outputs for bus-oriented applications

Common 3-state output enable input

Multiple package options

ESD protection:

• MIL-STD-883, method 3015 exceeds 2 kV

• HBM JESD22-A114F exceeds 2 kV

• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Single supply voltage translator at 1.8 V, 2.5 V, 3.3 V and 5.0 V

Up translation

• 1.2 V to 1.8 V at V_CC = 1.8 V

• 1.5 V to 2.5 V at V_CC = 2.5 V

• 1.8 V to 3.3 V at V_CC = 3.3 V

• 3.3 V to 5.0 V at V_CC = 5.0 V

Down translation

• 3.3 V to 1.8 V at V_CC = 1.8 V

• 3.3 V to 2.5 V at V_CC = 2.5 V

• 5.0 V to 3.3 V at V_CC = 3.3 V

5 V tolerant inputs

Latch-up performance exceeds 250 mA per JESD 78 Class II

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and -40 °C to +125 °C

Wide supply voltage range from 1.65 V to 5.5 V

High noise immunity

Overvoltage tolerant inputs to 5.5 V

±24 mA output drive (V_CC = 3.0 V)

CMOS low power dissipation

Direct interface with TTL levels

I_OFF circuitry provides partial Power-down mode operation

Latch-up performance exceeds 250 mA

Complies with JEDEC standard:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range from 1.65 V to 5.5 V

Overvoltage tolerant inputs to 5.5 V

High noise immunity

CMOS low power consumption

I_OFF circuitry provides partial Power-down mode operation

±24 mA output drive (V_CC = 3.0 V)

Latch-up performance exceeds 250 mA

Direct interface with TTL levels

Complies with JEDEC standards:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Multiple package options

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range:

• V_CC(A): 1.2 V to 5.5 V

• V_CC(B): 1.2 V to 5.5 V

High noise immunity

Maximum data rates:

• 420 Mbps (3.3 V to 5.0 V translation)

• 210 Mbps (translate to 3.3 V))

• 140 Mbps (translate to 2.5 V)

• 75 Mbps (translate to 1.8 V)

• 60 Mbps (translate to 1.5 V)

Suspend mode

Latch-up performance exceeds 100 mA per JESD 78 Class II

±24 mA output drive (V_CC = 3.0 V)

Inputs accept voltages up to 5.5 V

Low power consumption: 16 μA maximum I_CC

I_OFF circuitry provides partial Power-down mode operation

Complies with JEDEC standards:

• JESD8-7 (1.2 V to 1.95 V)

• JESD8-5 (1.8 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 3A exceeds 4000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range from 1.65 V to 5.5 V

Overvoltage tolerant inputs to 5.5 V

High noise immunity

CMOS low power dissipation

I_OFF circuitry provides partial Power-down mode operation

±24 mA output drive (V_CC = 3.0 V)

Latch-up performance exceeds 250 mA

Direct interface with TTL levels

Unlimited rise and fall times

Complies with JEDEC standard:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Multiple package options

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range from 1.65 V to 5.5 V

High noise immunity

±24 mA output drive (V_CC = 3.0 V)

CMOS low power dissipation

Direct interface with TTL levels

Overvoltage tolerant inputs to 5.5 V

I_OFF circuitry provides partial Power-down mode operation

Latch-up performance ≤ 250 mA

Complies with JEDEC standard:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range from 1.65 V to 5.5 V

Overvoltage tolerant inputs to 5.5 V

High noise immunity

CMOS low power dissipation

I_OFF circuitry provides partial Power-down mode operation

±24 mA output drive (V_CC = 3.0 V)

Latch-up performance exceeds 250 mA

Direct interface with TTL levels

Complies with JEDEC standard:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range from 2.0 V to 6.0 V

CMOS low power dissipation

High noise immunity

Symmetrical output impedance

Balanced propagation delays

Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

Input levels:

• For 74HC1G08-Q100: CMOS level

• For 74HCT1G08-Q100: TTL level

Complies with JEDEC standards:

• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)

ESD protection:

• MIL-STD-883, method 3015 exceeds 2000 V

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range:

• V_CC(A): 1.2 V to 3.6 V and V_CC(B): 1.65 V to 5.5 V

I_OFF circuitry provides partial Power-down mode operation

Inputs accept voltages up to 5.5 V

ESD protection:

• HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port

• HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port

• CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV

• MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port

• MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port

Latch-up performance exceeds 100 mA per JESD 78B Class II

Multiple package options

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide analog input voltage range from -5 V to +5 V

Low ON resistance:

• 80 Ω (typical) at V_CC - V_EE = 4.5 V

• 70 Ω (typical) at V_CC - V_EE = 6.0 V

• 60 Ω (typical) at V_CC - V_EE = 9.0 V

Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals

Typical ‘break before make’ built-in

ESD protection:

• MIL-STD-883, method 3015 exceeds 2000 V

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

• CDM AEC-Q100-011 revision B exceeds 1000 V

Multiple package options

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Asynchronous 8-bit parallel load

Synchronous serial input

Complies with JEDEC standard no. 7A

Input levels:

• For 74HC165-Q100: CMOS level

• For 74HCT165-Q100: TTL level

ESD protection:

• MIL-STD-883, method 3015 exceeds 2000 V

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range from 2.0 V to 6.0 V

CMOS low power dissipation

High noise immunity

Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

Complies with JEDEC standards:

• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)

Input levels:

• For 74HC373-Q100: CMOS level

• For 74HCT373-Q100: TTL level

3-state non-inverting outputs for bus-oriented applications

Common 3-state output enable input

ESD protection:

• MIL-STD-883, method 3015 exceeds 2000 V

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

Multiple package options

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Supply voltage range from V_CC = 4.5 V to 5.5 V

Very low ON resistance: 4 Ω (typical) at V_CC = 5 V

Switch inputs voltage range: V_SW = GND to V_CC

Control input voltage range: V_I(S) = GND to V_CC

Latch-up performance exceeds 200 mA per JESD 78 Class II level A

ESD protection:

• HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2 kV

• CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1 kV

Automotive product qualification in accordance with AEC-Q100 (Grade 2)

• Specified from -40 °C to +85 °C and from -40 °C to +105 °C

Supports up to 208 MHz clock rate

SD 3.0 specification-compatible voltage translation to support: SDR104, SDR50, DDR50, SDR25, SDR12, High-Speed and Default-Speed modes

1.1 V to 1.95 V host side interface voltage support

Auto-direction sensing

Low power consumption

Integrated pull-up resistors: no external resistors required

Integrated EMI filters suppress higher harmonics of digital I/Os

Level shifting buffers keep ESD stress away from the host (zero-clamping concept)

16-terminal XQFN16 package; pitch 0.4 mm

Latch-up performance exceeds 100 mA per JESD78 Class II.A

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2 kV

• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1 kV

• IEC61000-4-2, level 4, contact discharge on all memory card-side pins exceeds 8 kV

• IEC61000-4-2, level 4, air discharge on all memory card-side pins exceeds 15 kV

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range:

• V_CC(A): 1.2 V to 3.6 V and V_CC(B): 1.65 V to 5.5 V

Maximum data rates:

• Push-pull: 110 Mbps

I_OFF circuitry provides partial Power-down mode operation

Inputs accept voltages up to 5.5 V

ESD protection:

• HBM JESD22-A114E Class 2 exceeds 2.5 kV for A port

• HBM JESD22-A114E Class 3B exceeds 15 kV for B port

• CDM JESD22-C101E exceeds 1.5 kV

• IEC61000-4-2 contact discharge exceeds 8 kV for B port

Latch-up performance exceeds 100 mA per JESD 78B Class II

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range:

• V_CC(A): 1.2 V to 3.6 V and V_CC(B): 1.65 V to 5.5 V

Maximum data rates:

• Push-pull: 110 Mbps

I_OFF circuitry provides partial Power-down mode operation

Inputs accept voltages up to 5.5 V

ESD protection:

• HBM JESD22-A114E Class 2 exceeds 2.5 kV for A port

• HBM JESD22-A114E Class 3B exceeds 15 kV for B port

• CDM JESD22-C101E exceeds 1.5 kV

• IEC61000-4-2 contact discharge exceeds 8 kV for B port

Latch-up performance exceeds 100 mA per JESD 78B Class II

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range:

• V_CC(A): 1.65 V to 3.6 V and V_CC(B): 2.3 V to 5.5 V

Maximum data rates:

• Push-pull: 24 Mbps

I_OFF circuitry provides partial Power-down mode operation

Inputs accept voltages up to 5.5 V

ESD protection:

• HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port

• HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port

• MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port

• MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port

• IEC61000-4-2 contact discharge exceeds 8000 V for B port

Latch-up performance exceeds 100 mA per JESD 78B Class II

Multiple package options

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range:

• V_CC(A): 1.65 V to 3.6 V and V_CC(B): 2.3 V to 5.5 V

Maximum data rates:

• Push-pull: 24 Mbps

I_OFF circuitry provides partial Power-down mode operation

Inputs accept voltages up to 5.5 V

ESD protection:

• HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port

• HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port

• MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port

• MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port

• IEC61000-4-2 contact discharge exceeds 8000 V for B port

Latch-up performance exceeds 100 mA per JESD 78B Class II

Multiple package options

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Wide supply voltage range:

• V_CC(A): 1.65 V to 3.6 V and V_CC(B): 2.3 V to 5.5 V

Maximum data rates:

• Push-pull: 24 Mbps

I_OFF circuitry provides partial Power-down mode operation

Inputs accept voltages up to 5.5 V

ESD protection:

• HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port

• HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port

• MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port

• MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port

• IEC61000-4-2 contact discharge exceeds 8000 V for B port

Latch-up performance exceeds 100 mA per JESD 78B Class II

Multiple package options

DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints